
			Palm Software to control a Yaesu FT-100D

Version : V1.0
Date : 1.1.2004
Owner : Andrea Weick, hb9fbd, hb9fbd@uska.ch

Aim
The aim of this software is to control some main functions of the FT-100D. This software
is not thought to substitute a remote control, but provide an easy way to set some 
parameters without pressing few buttons of the FT-100D.

The controlled functions of the FT-100D are :

- Mode : USB, LSB, CW, AM, FM, WFM
- Filter : 300Hz, 500Hz, 2.4kHz, 6.0kHz
- VFO : A/B
- Frequency : +/-10MHz, +/-1MHz, +/-100kHz
- HAM Band : 160m,80m,40m,30m,20m,17m,15m,12m,10m,6m,2m and 70cm
- Brodacast Band* : AM,FM,AIR,120m,90m,75m,60m,49m,41m,31m,25m,22m,19m,16m,13m and 11m


Environment
This software was developped to control a FT100D with a Palm m505. Although not tested, 
this program could work with other Palm models or FT100 if they communicate at 4,8kbps.
The Palm should be connected to the FT100D-CAT interface by a Null-Modem serial cable.

Software components
The Zipped version contains 3 files :
- readme.txt		this file
- Form1FT100d.prc	the Palm application
- PToolboxLib761.prc	a library to be installed on the Palm (with Palm OS3.0 or higher)
 
Installation
To install the software transfer the 2 prc files to the Palm and run the application named FT-100D.

Warranty
There is not neither any type of warranty for this application nor responsibility for any
damage. Every action is done at your risk. This software is delivered "as is" and there is not
any future plan to extend it. The software is free and provided just to share my job.
Any feedback is welcome.







